Filter
Top Products
23
Setting the controls
To start the Self-Cleaning
cycle now:
1. Press the Clean pad. The display will
show “----”.
2. To set the cleaning time, press the
“increase” (▲) or “decrease” (▼) pad until
the desired cleaning time shows on the
display. You can set the cleaning time
anywhere between 2 and 4 hours.
• Use 2 hours for light soil.
•
Use 3 to 4 hours for moderate to
heavy soil.
3. Once you have set the cleaning time,
“CLEAN” and “LOCK” will appear on the
display followed by “ON”. The Self-
Cleaning cycle will begin automatically
within a few seconds.
To delay the start of
Self-Cleaning cycle:
Make sure the clock is set to the correct time
of day. (See “Setting the clock” in the “Using
Your Range” section.)
1. Press the Clean pad. The display will
show “----”.
2. To set the cleaning time, press the
“increase” (▲) or “decrease” (▼) pad
until the desired cleaning time shows
on the display. You can set the cleaning
time anywhere between 2 and 4 hours.
• Use 2 hours for light soil.
• Use 3 to 4 hours for moderate to
heavy soil.
USING THE SELF-CLEANING CYCLE
CLEAN
CLEAN