Filter
Top Products
Lift-Up Cooktop
1.
Lift front of cooktop at corners and
swing up the support rod.
2.
Carefully lower the cook-top onto
the support rod.
3. Wipe surface under cooktop with
warm soapy water. Use soapy
plastic scrub pad on stubborn
Spots.
CAUTICN: Do not drop the oook-
top. Damage can result to the
poroelaln and the oooktop
tmme.
Surface Burners
TWICAL TOP BURNER RIME
Lift up the cook-top, following the instructions above.
Wipe off surface burners with warm soapy water and a soft cloth after each
use.
Occasionally check surface burner flames for size and shape as shown. If
flames do not burn properly, you may need to remove the surface burners for
cleaning (see pageM], or call a qualified technician for burner adjustments.
To adJust the LO sefflngs on the control knobs:
1.
Turn on the surface burners, then set the controls on LO.
2. Wlthout changing the burner rettlngs, remove the control knobs.
3. Firmly grasp the control stem and insert a small bladed screwdriver into
the end of the stem. Turn the screwdriver in either direction until the flame
height is Ye in (.3l8 cm] or lower in size. Flame must be large enough to
malntaln a STABLE FLAME on all burner ports.
NEVER ADJUST THE FLAME SIZE AT THE MEDIUM SElllNG.