Whirlpool W10282549A Dishwasher User Manual


 
6”
(15.2 cm)
Direct Wire–Route cable
3
Route cable from power supply through cabinet hole (cable
must extend to the right front side of cabinet opening).
Tape cable to the floor in area shown. This will keep cable
from moving when dishwasher is moved into cabinet
opening.
Wood
cabinet
Metal
cabinet
Power Supply CordPrepare hole
2
Wood cabinet: Sand the hole until smooth.
Metal cabinet: Cover hole with grommet included with
power supply cord kit.
¹⁄₂"
(1.3 cm)
Drill hole
1
Preferred locations
Preferred locations
Preferred locations
Optional locations
Optional locations
Optional locations
Drill a ¹⁄₂" (1.3 cm) hole in the cabinet side or rear.
Helpful Tip: Routing the water line through the left side
of cabinet opening will make water connection easier.
Hot water line
2
Measure water supply line
Measure overall length of copper tubing or flexible
braided water supply line. Attach to the hot water line
using a connection configuration that is in compliance
with local codes and ordinances. The water line to the
dishwasher should have a manual shutoff valve.
Prepare and Route Water Line
(1.9 cm)
Direct Wire Drill hole
1
Preferred location
Preferred location
Preferred location
Optional location
Drill a ³⁄₄
"
(1.9 cm) hole in right-hand cabinet side or rear.
See product and cabinet opening dimensions.
Wood
cabinet
Metal
cabinet
Direct WirePrepare hole
2
Wood cabinet: Sand the hole until smooth.
Metal cabinet: Cover hole with grommet (Part Number
302797 - not provided).
Helpful Tip: Wiring the dishwasher will be easier if you
route the cable into the cabinet opening from the right side.
Option B, Direct Wire:
8