Whirlpool YKHMS145J Microwave Oven User Manual


 
10
Control panel features (cont.)
Getting to Know Your Microwave Oven
19. Number pads. Touch Number pads to enter
cooking times, cook powers, quantities,
weights, or food categories.
20. CLOCK SET/START. Touch this pad to enter
the correct time of day.
21. TIMER. Touch this pad to set or cancel the
Kitchen Timer.
22. START. Touch this pad to start a function.
23. CANCEL/OFF. Touch this pad to erase an
incorrect command, cancel a program during
cooking, or to clear the display.
24. TURNTABLE ON/OFF. Touch this pad to turn
your turntable on and off. (See Page 11.)
25. LIGHT ON/NIGHT/OFF. Touch this pad to turn
the light or night light on or off. (See Page 12.)
26. VENT FAN ON/OFF higher or lower. Touch
this pad to turn the fan on or off. (See Page 12.)
NOTES:
If you have entered all settings for a function
but do not touch START/ENTER in 5 seconds,
the START? indicator light will show.
For nonsensor functions, if you open the door
while the oven is on and then shut the door
within 15 minutes, the START? indicator light
will show. Touch START to continue. If you
open the door when sensor cooking, cooking is
cancelled and you have to start over.
If you choose a function but do not touch another
command pad within 1 minute, the display returns
to the time of day and you have to start over.
Interrupting cooking
You can stop the oven during a cycle by opening
the door. The oven stops heating and the fan
stops, but the light stays on. To restart cooking,
close the door and
TOUCH
Audible signals
Your microwave oven comes with audible signals
that can guide you when setting and using
your oven:
A programming tone will sound each time
you touch a pad.
One long tone signals the end of a Timer
countdown.
Four tones signal the end of a
cooking cycle.
Two quick, short tones sound once
every minute for the first 15 minutes after an
end-of-cooking signal as a reminder if the food
has not been removed from the oven.
Two quick, short tones will sound while
entering and exiting from a hidden feature (for
example, Child Lock) or time of day.
Three tones sound if you have
made an incorrect entry.
To disable the programming tone:
TOUCH
and hold for 5 seconds
To turn the programming tone back on:
TOUCH
and hold for 5 seconds
To disable all audible signals except the
end-of-timer and hidden feature signals:
TOUCH
and hold for 5 seconds
To turn signals back on:
TOUCH
and hold for 5 seconds
NOTE: Two tones will sound when audible signals
are turned on or off.
If you do not want to continue cooking:
Close the door and the light goes off.
OR
TOUCH
NOTE: Before setting a function, touch
CANCEL/OFF to make sure no other function is on.