Whirlpool YMT8076SE Microwave Oven User Manual


 
Electrical requirements
Observe all governing codes and ordinances.
A 120 Volt, 60 Hz, AC only, 15 amp fused
electrical supply is required. (A time-delay
fuse is recommended.) It is recommended
that a separate circuit serving only this
appliance be provided.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions
can result in death, fire, or
electrical shock.
GROUNDING INSTRUCTIONS
For all cord connected appliances:
The microwave oven must be grounded. In
the event of an electrical short circuit,
grounding reduces the risk of electric shock
by providing an escape wire for the electric
current. The microwave oven is equipped
with a cord having a grounding wire with a
grounding plug. The plug must be plugged
into an outlet that is properly installed
and grounded.
WARNING:
Improper use of the
grounding can result in a risk of
electric shock.
Consult a qualified electrician or service-
man if the grounding instructions are not
completely understood, or if doubt exists as
to whether the microwave oven is properly
grounded.
Do not use an extension cord. If the power
supply cord is too short, have a qualified
electrician or serviceman install an outlet
near the microwave oven.
For a permanently connected appliance:
This appliance must be connected to
a grounded, metallic, permanent wiring
system, or an equipment grounding con-
ductor should be run with the circuit
conductors and connected to the equip-
ment grounding terminal or lead on the
appliance.
7
-