Filter
Top Products
Control Panel
The control panel is shown in Figure 3, below. Control panel push buttons and features
are described in Table 1, immediately following.
Table 1. Westinghouse Microwave Oven Control Panel
Figure
No.
Push Button
or Feature
Function
1 POWER Press POWER to select a power setting. The power setting (P 10, P 9 etc.) will
apear in the display window. The default setting is P 10, the highest power setting.
Pressing POWER repeatedly causes the power setting to decrease one level
at a time, from P 10 (highest) to P 1 (lowest). To change levels more rapidly,
press and hold POWER until you reach the desired level.
During oven operation, pressing POWER will cause the current power level
to appear briefly on the display.
2 Number Pad The number pad allows you to enter digits for time.
• For setting the clock, please refer to Section 1,
Introducing the Westinghouse Microwave Oven on page 8.
• Please refer to Section 3, Basic Oven Operation,
on page 11 for instructions on entering cooking times.
3 STOP/CANCEL Press STOP/CANCEL once to temporarily interrupt any oven operation.
To resume, press
START.
Press STOP/CANCEL twice to cancel
any oven operation or program.
4 DEFROST Press DEFROST once to use the oven’s Auto Defrost function. Press twice
to begin Time Defrost. Please refer to Section 4, Defrosting on page 13
for detailed instructions on using the defrost function.
9
NOTE:
• Never operate the microwave oven without the turntable installed.
• The turntable must be able to rotate freely during oven use.
• Never place the turntable upside down.
• Always place food and containers of food on the turntable for cooking.
• The turntable may reverse direction when the oven is stopped and restarted.
• If the turntable or any part of the turntable assembly is damaged, contact Consumer Relations
at
1(800)947-3744 for replacement parts.
Set the Clock
Before using the Westinghouse Microwave Oven for the first time, you must set the clock to the correct time of day.
To set the clock:
1. Press
CLOCK on the control panel. The display will flash 0:00.
2. Use the digits on the number pad to enter the hour and minutes. For example, if you want to set the clock
to “5:30,” press in sequence: 5 3 0. To set the clock to “
10:45,” press in sequence: 1 0 4 5.
Note: The clock is a 12-hour clock. It does not distinguish AM /PM.
3. Once you have entered the correct time of day, press
CLOCK again to save the time setting.
Note: Colon flashes when clock is running.
The main features of your Westinghouse Microwave Oven are shown below in Figure 2.
NOTE: Your microwave oven may not match the illustration exactly.
8
Getting To Know Your Westinghouse Microwave Oven
Figure 3