Filter
Top Products
7
INSTALLATION INSTRUCTIONS
MODEL ICBWWD30
with Stainless Steel Drawer Front
Overall Width 759 mm
Overall Height 260 mm
Overall Depth 689 mm
Depth Behind Frame* 597 mm
Minimum Cabinet Width 762 mm
Minimum Cabinet Depth 610 mm
Minimum Base Support 91 kg
Opening Width 727 mm
Opening Height 232 mm
Opening Depth 606 mm
*Allow 10 mm additional depth for cord thickness.
STAINLESS STEEL DRAWER FRONT
INSTALLATION SPECIFICATIONS
The following illustrations provide the overall
dimensions and installation specifications for
the Wolf warming drawer with a stainless steel
drawer front.
Wolf recommends using a 838 mm wide
cabinet for the warming drawer with stainless
steel drawer front. A minimum 762 mm wide
by 610 mm deep cabinet is required with a
minimum base support of 91 kg.
Refer to pages 16–17 for stainless steel drawer
front installation instructions. These instruc-
tions are also included with the stainless steel
drawer front kit.
UNDERCOUNTER INSTALLATION
For undercounter installations, 597 mm from
the bottom of the warming drawer opening to
the floor is recommended. It must be installed
a minimum of 127 mm above the floor or
25 mm above the toe kick.
The Wolf warming drawer with stainless steel
drawer front may be installed below an electric
or gas cooktop, provided the warming drawer
is fully enclosed, top and bottom. Allow
enough room for gas and electrical connec-
tions for the cooktop. Refer to installation
instructions for the cooktop for additional
specifications. Dimensions will vary according
to the specific installation.
Overall Dimensions – Stainless Steel Drawer Front
Undercounter Installation – Stainless Steel Drawer Front