Wolf Pro Wall Ventilation Hood User Manual


 
4
WOLF PRO WALL CHIMNEY VENTILATION HOODS
LIST OF MATERIALS
The following is a list of materials shipped
with the Wolf Pro wall chimney hood.
Stainless steel wall chimney hood
Transition with backdraft damper—
attached inside hood (needs to be removed)
Decorative stainless steel rail and installa-
tion components—(R) model hoods only
Two control knobs
Filters and grease cups (installed in hood)
Wood mounting strip
Installation package
Installation Instructions
Use & Care Information and product
registration card
Wolf logo nameplate
INSTALLATION CONSIDERATIONS
Wolf Pro wall chimney ventilation hoods are
recommended for use with all Wolf cooking
appliances.
Proper installation is the responsibility
of the installer. Product failure due to
improper installation is not covered
under the Wolf Warranty. Refer to the
Wolf Pro Ventilation Hoods Use & Care
Information for warranty details, or visit
the Contact/ Help section of our website,
wolfappliance.com.
Make sure you have the tools and materials
necessary for proper installation.
Warranty service must be performed by a
Wolf authorized service center. Wolf is not
responsible for service required to correct a
faulty installation.
IMPORTANT NOTE:
Wolf Pro ventilation
hoods are shipped without the blower
assembly. Wolf internal, in-line and remote
blower assemblies are available, refer to page
17. Use only a Wolf blower with the Pro wall
chimney hood.
IMPORTANT NOTE:
Wolf recommends that
the Pro wall chimney hood be installed 30"
(762) to 36" (914) above the countertop.
Rail option (R) wall chimney hoods come with
a classic stainless steel decorative rail and
stand-offs. Optional platinum or brass rails are
available to match Wolf dual fuel range bezels.
Contact your Wolf dealer for details.
If you are installing an optional duct cover with
the Pro wall chimney hood, refer to instruc-
tions on page 10 before installing the hood.
Wall Chimney Hood
Wall Chimney Hood
(R) Rail Option
When performing installation, servicing
or cleaning the unit, it is recommended
to wear safety glasses and gloves.