Filter
Top Products
Induction Cooktop Operation 10
Cooktop Operation
LOCK MODE
If the cooktop remains idle for more than 5 minutes, it
automatically enters lock mode. In lock mode, all touch
pad operations on the control panel are disabled and all
induction elements are turned off. A steady glowing light
within the “key” symbol indicates that the cooktop is
locked. Refer to the illustration below.
• To unlock the control panel, touch and hold the key
symbol for 5 seconds. Two chimes will sound and the
light within the key symbol will go out. All touch pad
operations are enabled.
• To lock the control panel, touch and hold the key
symbol for 3 seconds. Three chimes will sound and the
light within the key symbol will illuminate. The cooktop
is now in lock mode.
IMPORTANT NOTE: When the cooktop is powered up
for the rst time or if there has been a power outage, the
cooktop will default to lock mode.
OFF
O
MELT
HIGH
OFF ON
OFF ON
MELT
HIGH
H
I
-
P
O
W
E
R
OFF ON
SIM
HIGH
H
I
-
P
O
W
E
R
OFF ON
SIM
HIGH
H
I
-
P
O
W
E
R
OFF ON
HIGH
SIM
CLEAR
Lock mode (CT36I/S shown).
KEY SYMBOL
TOUCH PAD
INITIAL START-UP
Before using your induction cooktop for the rst time,
clean the glass-ceramic surface as recommended in the
cleaning section on page 15. The cooktop surface must be
free of any foreign substances, especially those that could
melt and permanently adhere to the glass-ceramic surface.
When the cooktop is powered up for the rst time it will
default to lock mode. To unlock the control panel, touch
and hold the key symbol for 5 seconds.
IMPORTANT NOTE: A small amount of smoke and odor
may be noticed during the initial break-in period.