Filter
Top Products
Induction Cooktop Operation 12
HOT SURFACE INDICATOR
As a safety precaution, a hot-surface indicator light will
illuminate when the surface temperature of any one of the
induction elements rises above 150°F (65°C). ‘HOT’ will
illuminate in the control panel display. It will remain illumi-
nated until the entire surface temperature has lowered to a
safe level, even after the cooktop controls are turned off.
TIMER OPERATION
The induction cooktop features a countdown timer located
in the control panel. Refer to the illustration below.
The timer may be set in one-minute increments up to 99
minutes. Once set, the remaining time will be illuminated in
the control panel as it counts down. The timer can be used
anytime the cooktop is not in lock mode.
• To start the timer, touch + on the timer control. Touch
and hold + or – until the desired time is shown in the
timer display. The timer will begin its countdown in
minutes, 3 seconds after the time is set.
• A warning chime will sound when the timer has one
minute left and begins to countdown in seconds.
• When the timer reaches 0, an audible chime will sound.
The chime will continue to sound every 30 seconds
until CLEAR is touched.
OFF
O
MELT
HIGH
OFF ON
OFF ON
MELT
HIGH
H
I
-
P
O
W
E
R
OFF ON
SIM
HIGH
H
I
-
P
O
W
E
R
OFF ON
SIM
HIGH
H
I
-
P
O
W
E
R
OFF ON
HIGH
SIM
CLEAR
Hot-surface indicator.
Timer control.
OFF
O
MELT
HIGH
OFF ON
OFF ON
MELT
HIGH
H
I
-
P
O
W
E
R
OFF ON
SIM
HIGH
H
I
-
P
O
W
E
R
OFF ON
SIM
HIGH
H
I
-
P
O
W
E
R
OFF ON
HIGH
SIM
CLEAR
HOT-SURFACE
INDICATOR LIGHT
CLEAR
TOUCH PAD
+ AND –
TOUCH PADS
Cooktop Operation
HI-POWER MODE
Hi-Power mode boosts power on one induction element
by diverting power from an adjacent element. This mode is
suitable for frying foods or boiling water rapidly.
To activate Hi-Power mode, touch the OFF ON touch pad
for the element you wish to use. Then touch HI-POWER.
Power from an adjacent element will automatically be
diverted to the element. If the adjacent element is on HIGH
power, the power output will be reduced. This reduction in
power will be displayed in the power bar indicator of the
adjacent element.
OFF
O
MELT
HIGH
OFF ON
OFF ON
MELT
HIGH
H
I
-
P
O
W
E
R
OFF ON
SIM
HIGH
H
I
-
P
O
W
E
R
OFF ON
SIM
HIGH
H
I
-
P
O
W
E
R
OFF ON
HIGH
SIM
CLEAR
Hi-Power mode (CT36I/S
shown).
HI-POWER
TOUCH PAD