Filter
Top Products
Induction Cooktop Operation 11
wolfappliance.com
Cooktop Operation
ELEMENT ACTIVATION
To activate an induction element, touch the OFF ON touch
pad that corresponds to the element you wish to use.
The power bar indicator will begin to blink and show a half-
power status.
To complete the activation, touch one of the following
symbols or touch pads of the element control while the
power bar indicator is still blinking:
• Touch SIM or MELT to set the power output at the
lowest heat setting and complete the activation.
• Touch the + or – symbol to set the power output at the
medium heat setting and complete the activation.
• Touch HIGH to set the power output at the high heat
setting and complete the activation.
• Touch HI-POWER to set the power output at the
maximum level and complete the activation.
OFF
O
MELT
HIGH
OFF ON
OFF ON
MELT
HIGH
H
I
-
P
O
W
E
R
OFF ON
SIM
HIGH
H
I
-
P
O
W
E
R
OFF ON
SIM
HIGH
H
I
-
P
O
W
E
R
OFF ON
HIGH
SIM
CLEAR
Element activation.
Heat settings.
OFF
O
MELT
HIGH
OFF ON
OFF ON
MELT
HIGH
H
I
-
P
O
W
E
R
OFF ON
SIM
HIGH
H
I
-
P
O
W
E
R
OFF ON
SIM
HIGH
H
I
-
P
O
W
E
R
OFF ON
HIGH
SIM
CLEAR
OFF ON
TOUCH PAD
+ AND –
SYMBOLS
SIM
TOUCH PAD
HIGH
TOUCH PAD
ELEMENT ACTIVATION
To change the heat setting—the element is activated and
the power bar indicator remains steadily lit:
• Touch SIM or MELT to decrease the setting directly to
the lowest heat.
• Touch the + or – symbol to change the heat setting
incrementally up or down.
• Touch HIGH to increase the heat setting directly to
high.
• Touch HI-POWER to boost to Hi-Power mode.
• Touch OFF ON to turn the element off.
IMPORTANT NOTE: If no cookware or an incompatible
pan is placed on an induction element after activation,
the control will blink for 30 seconds, then the element will
automatically shut off.