Filter
Top Products
21
WOLF TROUBLESHOOTING GUIDE
N
othing works
“LO” appears in
the temperatur
e
display
M
odule is not connected to a
proper electrical circuit.
Fuse is blown or circuit
b
reaker is tripped.
No electricity to the module.
Module is in
Lock mode
.
Fryer module was started
with no oil.
Oil level is too low in the
fryer basin.
H
ave an electrician verify that the proper
voltage is being applied to the module.
Have an electrician replace the fuse or
r
eset the circuit breaker.
Have an electrician check the house
power supply. Unlock the control (see
page 8).
1) Press the
CLEAR
touch pad.
2)
Add oil to the appropriate level.
3) Unlock the control.
4) Resume operation of the control.
After adding oil, the contr
ol may take
a few minutes to reset.
TROUBLESHOOTING GUIDE
PROBLEM PROBABLE CAUSE POSSIBLE SOLUTION
Dimensions in parentheses are in
millimeters unless other
wise specified.