Zanussi ZCM 630 Range User Manual


 
9
TIMER
TIMER
TIMER
F
MANUAL FUNCTION
Press button to set the oven for manual function.
F
TO SET THE TIMER TO SWITCH OFF
ONLY
This is useful if you want to begin cooking immediately
but have the oven switch off automatically.
1. Set the oven function control knob and the thermostat
control knob on the required settings.
2. Place food in the oven.
3. Press button , release the button, then turn the
time setting knob until the required cooking duration
is displayed.
Our diagram shows the timer set for 30 minutes.
At the end of the cooking time the oven will switch off, an
alarm will sound. To switch off the alarm press button .
Ensure the oven function control knob and
the thermostat control knob are in the OFF
position.
F
TO SET THE TIMER TO SWITCH
THE OVEN ON AND OFF
1. Ensure the clock is showing the right time of day.
2. Carry out steps 1, 2 and 3 as explained in "To set the
timer to switch off only".
3. Press button , release the button, then turn the
time setting knob until the end cooking time is
displayed.
Our diagram shows the end cooking time set for
7.00 pm.
4. The oven will switch on and off automatically.
The end of cooking will be marked by an acoustic
alarm. To switch off the alarm press button .
Ensure the oven function control knob and
the thermostat control knob are in the OFF
position.
F
TO CANCEL A PROGRAMME
Press button . Any set program or program in operation
will be cancelled and the timer will revert to manual
function.
Ensure the oven function control knob and
the thermostat control knob are in the OFF
position.