Filter
Top Products
The control panel
- 6 -
Switching the buzzer off
Before switching the buzzer off all programmes must have
been completed.
1. Press in the On/Off button.
2. Press the combination buttons simultaneously
and hold them pressed in. When the first three
programme indicator lamps starts to flash, you
can let go of the buttons.
3. Press the buzzer button once. The lamp for
the buzzer button starts to flash and the lamp
for the ended programme cycle is lit. Press the
button once more and the lamp for the ended
programme cycle goes out. Now the buzzer is off.
4. Press out the On/Off button to complete the setting.
To reset the function, follow steps 1 and 2 above
and then press the buzzer button twice, until
the end of programme lamp is illuminated again.
Combination buttons ”A”
In addition to selecting a programme, you can press
these two buttons to adjust the setting of the water
softener, switch off the buzzer and rinse aid dispenser.
Indicator lamps:
Shows • Wash cycle in progress top lamp
• Rinse cycle in progress middle lamp
• Drying in progress lowest lamp
Control lamps:
Shows that • Refilling of salt container is necessary
• Refilling of the rinse aid dispenser
is necessary
• The selected programme has
finished
Programme
buttons
Water softener
button
Buzzer
button
On/Off button
Rinse aid
button
Indicator lamps
Control lamps
A