Zanussi ZDT 420 Dishwasher User Manual


 
Installation
Check your dishwasher for any transport
damage. Never connect a damaged ma-
chine. If your dishwasher is damaged con-
tact your supplier.
All packaging must be removed before use.
Any electrical and plumbing work required to
install this appliance must be carried out by
a qualified and competent person.
For safety reasons it is dangerous to alter
the specifications or attempt to modify this
product in any way.
Never use the dishwasher if the electrical
supply cable and water hoses are damaged;
or if the control panel, work top or plinth area
are damaged such that the inside of the ap-
pliance is freely accessible. Contact your
local Service Force centre, in order to avoid
hazard.
All sides of the dishwasher must never be
drilled to prevent damage to hydraulic and
electric components.
WARNING!
For electrical and water connection carefully
follow the instructions given in specific para-
graphs.
Control panel
7
1
3
2
4 5
6
BCA
1.
On/Off button
2. Digital display
3.
Programme selection buttons
4.
Half load button
5.
Delay start button
6. Indicator lights
7. Function buttons
4