Filter
Top Products
Setting mode
Press the On/Off button; if indicator lights of the
programme selection buttons are illuminated
and on the digital display are visible two hori-
zontal lines the appliance is in setting mode.
Always remember that when performing the
following operations:
– selecting a washing programme,
– setting the water softener level,
– activating/deactivating the audible signals,
the appliance MUST be in setting mode.
Press the On/Off button; If other button indica-
tor lights are on and in the digital display is
visible the number of a programme (1 - 2 - 3
etc..), this means that a washing programme
has been set.
In this case, to return to setting mode, the pro-
gramme has to be cancelled (see instructions
“Cancel a washing programme in progress”).
Digital display
In the digital display is indicated:
– the level of hardness to which the water softener is
set,
– if the audible signals are activated/deactivated,
– The number corresponding to the selected washing
programme,
– the approximate remaining time of the running pro-
gramme,
– the countdown of the delay start,
– fault codes concerning malfunction of the appliance.
Function buttons
In addition to the dishwashing programme selection
and the half load option, , the following functions can
also be set with the help of these buttons.
– the setting of the water softener,
– the cancelling of a programme in progress,
– deactivation/activation of the audible signals.
5