Filter
Top Products
23
Always ensure that the glass is returned to the
same side trim it was removed from.
To replace the trim, line up the clips on the
underside of the trim with the connectors at the
top of the door.
Carefully slide the trim towards the door.
Ensure the trim is securely in place before
closing the oven door.
WARNING!
Do not attempt to use the oven without the
glass being in place.
To clean the inner glass door
panels
Clean the inner glass door panels using hot
soapy water, hob cleaner may also be used. Do
not use hob cleaner on the stainless steel or
painted surfaces. Ensure that all parts are well
rinsed and thoroughly dried before attempting to
replace the glass.
Replacing an oven light bulb
• The type of bulb required is a 300°C 25 watt
small Edison Screw.
WARNING!
Disconnect the appliance from the electricity
supply before replacing the bulb.
• Make sure the appliance is cool before
replacing the bulb.
• Open the door and remove the shelves.
• Remove the glass cover by turning it to the
left.
• Unscrew the bulb by turning it to the left.
• Fit a new bulb and then replace the glass
bulb cover.
• Refit the shelves.
• Restore the electricity supply.