Zanussi ZKT 863 LX Range User Manual


 
16
Switching off the safety cut-out
function before it has come to an
end
There are two ways to switch off the safety cut-out
function before it has come to an end.
Switch off the cooking zone and timer si-
multaneously
1.Using the heat setting selector sensor panel, re-
set the desired cooking zone to zero: the cooking
zone and timer will switch themselves off.
Switch off the timer – the cooking zone
remains active
1.Select the desired cooking zone using the timer
sensor panel. The corresponding control lamp will
then flash more rapidly.
2.Using the - timer setting sensor panel, set the tim-
er to 00:
only the timer will switch itself off.
the cooking zone will remain in operation.
Countdown timer
To be able to use the countdown timer the appliance
must be switched on, but all the cooking zones must
be switched off.
1.Touch the timer sensor panel .
00 will be shown in the timer display.
2.Set the desired period of time using the + or -
timer setting sensor panels.
The countdown timer function will be activated after
several minutes and the remaining time will be dis-
played.
To reset the remaining time, touch the timer sensor
panel and change the setting using the + or - sen-
sor panels for setting the timer.
After the set period of time has elapsed an acoustic
signal sounds and the timer display flashes 00.
3.To switch off the signal, touch the timer sensor
panel.