Filter
Top Products
Electrolux
35
Electronic programmer
4
5
123
6
7
8
Fig. 4
1. Push button for selecting a function
2. Decreasing control button “ ”
3. Increasing control button “ ”
4. Display
5. “Cooking Duration” pilot lamp
6. “End of cooking” pilot lamp
7. “Minute minder” pilot lamp
8. “Time of day” pilot lamp
The oven will only work if the time of day
has been set.
However, the oven can also be operated without
any programme.
Setting the time of day
When the power supply is switched on, or after a
power failure, the “Time of day” pilot lamp
will flash
on the display.
To set the correct time of day:
1. Press button “
” or “ ”.
2. After the setting is carried out, wait for 5 seconds: the
“Time of day” pilot lamp will go out and the
display will show the set time. The appliance is rea-
dy for use.
To reset the correct time of day:
1. Press button
repeatedly to select the “Time of
day” function. The relevant pilot lamp will start
flashing. Then proceed as described above.
The time of day can only be reset if no automatic
function (cooking duration or end of cooking
) has been set.