Filter
Top Products
Electrolux
37
“End of cooking” function
With this function, you can set the oven to switch off
automatically when a programmed end of cooking time is
over. Place food in the oven, select a cooking function
and adjust the cooking temperature. Press button
repeatedly to select the “End of cooking” function. The
relevant pilot lamp will start flashing. Then, proceed
as follows:
To set the End of cooking time:
1. Press button “
” or “ ”.
2. After the setting is carried out, wait for 5 seconds: the
“End of cooking” pilot lamp
will come on and
the display will revert to the time of day.
3. When cooking time is over, the oven will be
switched off automatically and an acoustic alarm will
be heard, and the pilot lamp will start flashing. Turn
the oven function and the thermostat control knob to
zero.
To switch off the acoustic alarm, press any button.
NOTE: turning the acoustic alarm off will reset the
oven to manual, and if the oven function and the
thermostat knobs are not set to zero the oven will
start to heat again.
To cancel the End of cooking time:
1. Press button
repeatedly to select the “End of
cooking” function. The relevant pilot lamp
will
flash and the display will show the programmed
End of cooking time.
2. Press button “
” until the display shows the
current time of day. The programmer will beep and
the pilot lamp will go out.