Filter
Top Products
19
fig. 3.
Fit the refrigerator door to the upper door hinge pin (d)
then slightly tilting both doors fit the pin of the double
door hinge (m) into the left drill hole of the refrigerator
door.
Opening both doors fix the double door hinge onto the
left side using the screws (2 pieces) (c). Do not forget to
replace the plastic spacer (b) under the hinge. Be
careful that the door edges are parallel with the edge of
the mantle.
Put the appliance into its location, set it level, and apply
voltage to it.
In case you do not want to perform the procedures above,
please contact your local Service Force Centre.
The engineer will carry out the door reversal at your cost.