Zanussi ZSF 6280 Dishwasher User Manual


 
40
Extension hoses
Extension hoses are available from your local Serv-
ice Force Centre. To ensure that the function of the
appliance is not impeded, the internal diameter of
extension hoses must be 19 mm.
Extension hoses must not be laid more than a
maximum distance of 4 metres horizontally; the
maximum permitted height for the connection for
the drain hose is then 85 cm.
Sink outlet connection
The outlet of the drain hose (ø 19 mm) fits all com-
monly available sink outlet types. The outer diame-
ter of the sink outlet connection must be at least
15 mm.
The drain hose must be fixed to the sink outlet
connection using the hose clamp supplied.
Water drainage if the dishwasher is built-
in at high level
If the dishwasher is installed at a high level, and the
drain hose connection is less than 30 cm from the
lower edge of the appliance, adapter kit
ET 111099520 must be fitted by your local Service
Force Centre.
Water drainage into sink (only possible
with free-standing appliances)
If you wish to hang the drain hose over the edge of a
sink, use a detachable hose elbow. You can obtain
this from Service Force by referring to spare part
number ET 646 069 190.
1.Fit the elbow to the drain hose.
2.Secure the drain hose so that it cannot slide off the
edge of the sink.
Pass a piece of cord through the hose elbow and
fix it to the wall or the tap.
Anti-flood system
For protection from water damage, the dishwasher is
equipped with a anti-flood system.
In the event of a fault, the safety valve in the water in-
let hose immediately interrupts the supply of water to
the appliance and the drain pump is activated. In this
way water can neither escape nor overflow. The re-
maining water in the appliance is automatically
pumped out.
Should a fault occur when the appliance is switched
on, a buzzing tone can also be heard.