Filter
Top Products
5
6. "DRY" selection push button
By pressing this push button you can opt to
shorten (ECO DRY) or completely eliminate
(NO DRY) the heating phase during the last
rinse, so making a considerable energy saving.
The indicator light corresponding to the
selection will come on.
This option is not available with programmes 1
(Rinse and Hold) and 10 (Plate warmer).
If "NO DRY" is selected the supply of rinse
aid is automatically excluded.
If both indicator lights are off, the full drying
cycle will be carried out.
7. "DELAY START" push button
Allows the start of the programme to be
delayed by a minimum of 1 hour, up to 12
hours.
8. "CANCEL" push button
(See page 16)
Audible signals
Audible signals have been introduced to help
indicate which operations the dishwasher is
performing.
Short "instruction accepted" signal
When any of the push buttons are pressed
(except the ON/OFF push button), a
short audible signal informs you that the machine
has accepted the instruction given.
Long "programme run" signal
A continuous audible signal informs you, once
closed the door, that the washing programme is
starting.
Intermittent "end of programme" signal
A short intermittent audible signal informs you
that the washing programme has ended.
"Alarm" intermittent signal
The machine is fitted with a number of alarm
systems to help you determine the cause of any
problems (see "Something not working").
An intermittent audible signal informs you that
an alarm is activated.
To deactivate these audible signals, press
simultaneously both "PROGRAMMES
SELECTION" and "DRY" push buttons for at least 5
seconds at the end of which 3 short intermittent
audible signals inform you that the audible signals
have been deactivated.
To reactivate these audible signals, press
simultaneously both "PROGRAMMES
SELECTION" and "DRY" push buttons for at least 5
seconds at the end of which 3 short intermittent
audible signals inform you that the audible signals
have been reactivated.
Both operations (to deactivate or
reactivate the audible signals) can be
carried out before starting or during a
washing programme.
SO256