Filter
Top Products
26
How to use the pyrolytic cleaning
function
Before activating the pyrolytic cleaning
function, remove any excessive spillage and
make sure that the oven is empty. Do not
leave anything inside it (e.g. pans, grids,
baking tray, dripping pan, etc.) as this could
heavily damage them.
Ensure that the oven door is closed before
activating the pyrolytic cleaning function.
When the pyrolytic cleaning function is on, it
is advisable not to use the hob as this could
cause overheating and damage the
appliance.
During the pyrolytic cleaning cycle the oven
door becomes hot. Children should be kept
away until it has cooled.
Choose this function to clean the oven by pyrolysis.
The following pyro levels are available:
Pyrolytic 1 (P I) time : 2 h = 30 min heat-up +1 h at
480°C + 30 min cooling down.
Pyrolytic 2 (P 2) time : 2 h 30 min. = 30 min heat-up
+1 h 30 min at 480°C + 30 min cooling down.
The pyro duration time cannot be changed.
Remove the shelf supports and all oven
accessories before activating the pyrolytic
cleaning cycle.
To remove the shelf supports, proceed as follows:
Before proceeding ensure the oven is
cool and disconnected from the elec-
tricity supply.
Removal
1. remove the front screw while keeping the shelf
support in position with the other hand (Fig. 17).
2. Disengage the rear hook and take off the shelf
support. Do the same thing on the other side of
the oven (Fig. 18).
Fig. 17
Fig. 18