Electrolux
EFS - Dishwashing Systems Platform
Electrolux Professional
DOC. NO. 5956.677.00 P. 14 / 30
Use the drain and de-lime buttons to select the other parameter families. Press the blue button (in relief) to
return to the display of the Apex family.
Press the confirm button ("C" -
(Figure 1)
to access the first parameter of the subfamily selected.
Press the blue button (in relief) to return to the display of the subfamily.
To move through the parameters and to edit them, use the same procedures indicated in the GENERIC FUN-
CTION family.
A3.1.6.1 Start-up menu (SUP)
The Startup menu accesses preset formulas to automatically program the dispenser for most common instal-
lations. Typically, no further programming is required after setting up the dispenser in the Startup menu.
The Startup menu
/ SUP
family parameters are described below:
A3.1.6.2 Adjustment menu (probe) (AdJ)
The Adjustment Menu is determined by the Operation Mode chosen in the Startup Menu. Only the Adjustment
Menu appropriate to your system (your default Adjustment Menu) will appear on your screen. This is the
"Inductive probe" adjustment menu.
Parameter
name
Display vis-
ualization
Family
Nr.
Parameter
Nr.
Parameter description Unit of
measure
Min Max Factory setting
[for WT44]
Operation
mode
OPM
7 0 Specifies if the type of control for
detergent dosing is carried out by
means of a conductivity probe or by
time.
“0” : Inductive probe detergent control;
“1” : Time detergent control.
-01 0
Product
pRD
7 1 Specify the product type.
“1” : GPRPI, Solid Power, Solid Power
with Glass Guard.
“2” : GPRPII, Apex Power.
“3” : GPRPIII, Apex Power Plus, Apex
Ultra, Solid Fusion.
“4” : GPRPIV, Solid Metal Fusion.
“5” : GPRPV, Solid Metal Pro.
“6” : GPRPVI, Solid Endurance.
-16 2
Soil level
soL
72
Specify the crockeries soil level.
“0”: Light.
“1”: Normal.
“2”: Heavy.
-02 1
Water
hardness
HRD
73
Specify the water hardness.
“0”: Soft.
“1”: Medium.
“2”: Hard.
-02 1
OPM
0
0
