A SERVICE OF

logo

3.2.5.7 Carriage Home Position Sensor Removal
1. Remove the printer mechanism. (See Section 3.2.4.)
2. Disconnect the sensor cable from the carriage home position sensor.
3. Unhook the 3 notches securing the carriage home position sensor to the upper frame. Then remove
the carriage home position sensor.
3.2.5.8 PE Sensor Removal
1. Remove the printer mechanism. (See Section 3.2.4.)
2. Disconnect the connector for the PE sensor.
3. Rotate the printer mechanism upside down; use tweezers to release the 2 hooks securing the PE sensor
to the paper feed roller assembly. Then remove the PE sensor.
Sensor Cable
Carriage Home
Position Sensor
Figure 3-18. Carriage Home Position Sensor Removal
Sensor Cable
PE Sensor
Bottom Frame
Figure 3-19. PE Sensor Removal
Stylus Pro Service Manual Disassembly and Assembly
Rev.A 3-15