A SERVICE OF

logo

Operation / 操作
313483A 13
Operation / 操作
Pressure Relief Procedure / 泄压步骤
Applicator (Base Coat Pump) / 喷涂器 (底色漆泵)
English
1. Turn engine OFF. 2. Turn on/off switch OFF
and turn pressure con-
trol knob fully counter-
clockwise.
3. Turn drain valve down
to DRAIN position.
Fluid from drain valve
can splash in eyes or
skin and cause serious
injury. Keep hands
clear of pressure relief
valve and always wear
safety glasses.
NOTE: If you suspect
spray tip or hose is com-
pletely clogged or that
pressure has not been fully
relieved after following the
previous steps, cover the
connection at end of hose
with a heavy rag and very
slowly loosen connection.
中文
1. 关闭发动机。 2. 关断通 / 断开关,并将
压力控制旋钮逆时针旋
到底。
3. 将泄压阀向下旋转至泄
压位置。从泄压阀流出
的流体会溅入眼内或皮
肤上,导致严重的损
伤。双手要避开泄压阀
并始终戴上防护镜。
注释:如果怀疑喷嘴或软
管完全堵塞或在完成前述
步骤后怀疑压力未完全释
放掉,可用一块厚抹布盖
住软管末端的接头,然后
极为缓慢地松开接头。
ti6208b