A SERVICE OF

logo

Repair / 修理
56 313483A
English
10. Apply thread sealant to
screws. Install four
screws (28) and lock
washers (24). Alter-
nately torque screws to
125 ± 10 in-lb (14 ± 1.1
N•m) until rotor is
secure. Use threaded
holes to hold rotor.
11. Install pinion assem-
bly (29) with four
screws (36) and wash-
ers (37).
12. Connect clutch cable
connectors to inside of
pressure control.
中文
10. 将螺纹密封剂涂抹到
螺钉上。装上四个螺
(28)和防松垫圈
(24)。用 125
± 10 磅英寸
(14 ± 1.1 N•m
的扭力交替拧紧螺
钉直到转子固定。
利用螺孔来稳住转子。
11. 用 4 个螺钉 (36)和
垫圈 (37)装上小齿
轮组件 (29)。
12. 将离合器的电缆连接器
接入压力控制器内。
28
24
ti5481a
ti13217a
ti13356a