Step 7. Configuring the Display Language
(Optional)
Skip this step if you want English
as the display language.
1 Press and hold [Select*] while
simultaneously pushing the power
switch ON (In). Hold [Select*] until
CONFIG LANGUAGE appears.
2 Release [Select*]. INTERNAL TEST
appears briefly. Wait
for LANGUAGE=ENGLISH to appear.
3 Press [+] repeatedly until the desired
language appears. Choices will
appear in the native language.
4 Press [Select*] to save your choice.
(In the example, German is
displayed.)
Note
If the new language does not appear in the
display, you may not have pressed
[Select*] to save your new selection.
5 Press Online . The Control Panel
display will indicate the printer is
ready to use.
+
Online
Select *
Select *
Select *
12 - Getting Started Guide EN
