4 In Windows Program Manager, select the File menu.
5 Choose Run.
6 Click Browse.
7 Select the SETUP.EXE program file in the root directory on the
CD-ROM drive.
8 Click OK.
9 Verify the SETUP.EXE is entered in the Command Line in the Run
window.
10 Click OK.
11 Click Continue to install the automatically detected printing software
for Windows.
Note
If you need to set up printing software for another environment or
language, click Exit instead of Continue and use the CD-ROM
Directory Structure Table on page 37 to find the path for the software
you want to install. For example, if you want to install printing
software for Windows 95 in Spanish, the path would be
\win95\Espanol\Disk1\SETUP.EXE.
OS/2 Driver
Using the CD-ROM Directory Structure Table on page 37, find the
operating system for which you want to install printing software.
Next, find the correct directory for the language of the software you are
installing. Change to \DISK1 subdirectory and start the installation.
To install the OS/2 PCL driver or OS/2 PostScript driver on OS/2
systems (versions 2.0 w/Service Pak or later of the OS/2 operating
system), proceed as follows.
If a printer was not selected during OS/2 installation:
1 Open the Templates Folder (located in OS/2 system folder after OS/2
installation).
2 Point to the Printer template.
3 Press and hold mouse button 2.
4 Drag the template to the desktop.
5
Release mouse button 2.
6 Type a name for a printer in the Name field.
7 Select a port to which the printer is connected.
8 Select Install new printer driver. A window appears with a list of the
printer drivers that are shipped with OS/2.
9 Select Other printer driver.
10 Insert the CD-ROM containing the printer drivers into the CD-ROM
drive.
11 Select Refresh. Wait until the window fills with printer drivers.
12 Select one or more drivers by clicking on the left mouse button over
the desired driver.
13 Select Install.
34 - Getting Started Guide EN
