A SERVICE OF

logo

Advanced Configuration and Management Guide
Figure D.7 OSPF redistribution filters
IP/RIP Redistribution Filters
IP/RIP redistribution filters control redistribution of routes from other protocols into RIP. A device running RIP can
redistribute static routes, OSPF routes, and BGP4 routes (if BGP4 is supported on the device) into RIP.
Optionally, you can specify a metric that the route must match or you can set the metric on redistributed routes.
By setting the metric, you can cause the routing switch to prefer IP/RIP routes or redistributed routes to the
specified network.
Actions
IP/RIP redistribution filters permit (redistribute) or deny (do not redistribute) OSPF or BGP4 routes into IP/RIP.
Scope
You configure IP/RIP redistribution filters globally. They are automatically applied as soon as you configure them.
C - 26
OSPF
Router
OSPF
Router
IP/RIP
Router
192.124.28.0/24
OSPF Route Redistribution Filters
FilterID Action Address
-------------------------------------------
1 Permit 201.99.81.0/24
2 Permit 192.124.28.0/24
201.99.81.0/24
191.47.12.0/24
X