140 Commands
Error Codes
The error codes that can be reported in bytes 16 and 17 are listed in Chapter
10 of the Hardware Integration Guide, Volume 1 of the HP Ultrium Technical
Reference Manual.
53 02h
Medium removal prevented An
UNLOAD command has failed to eject the tape
because medium removal has been prevented.
55 03h Insufficient resources
55 06h
Media Auxiliary Memory full There is insufficient space in the Host Attribute area in
MAM to fit the attribute that need to be written.
5D 00h
Failure prediction threshold exceeded Failure Prediction thresholds have been exceeded
indicating that a failure may occur soon.
5D FFh
Failure prediction threshold exceeded (false) A MODE SELECT command has been used to test for the
Failure Prediction system.
82 82h
Drive requires cleaning The drive has detected that a cleaning operation is
advisable to maintain good operation.
82 83h
Bad microcode detected The data transferred to the drive during a firmware
upgrade is corrupt or incompatible with the drive
hardware.
Code Description Explanation
