13
Chapter 2 Settings and Adjustments
5
Adjust the signal output range
● To adjust color gradation automatically [Range Adjustment]
Every color gradation (0 to 255) can be displayed by adjusting the
signal output level.
(1) Choose <Range Adjustment> from the <Screen> menu, and press
.
A message “Your setting will be lost it you press AUTO button” appears.
(2) Press again while the message is displayed.
The output range is adjusted automatically to display images with the
maximum color gradation.
All the adjustments using the “Screen Adjustment Program” are completed.
6
Change the smoothing setting.
● To modify blurred characters/lines [Smoothing]
When a low-resolution image is displayed, the characters or lines of
the displayed image may be blurred.
(1) Choose <Screen> from the Adjustment menu, and press .
(2) Choose <Smoothing> from the <Screen> menu, and press .
The <smoothing> menu appears.
(3) Select a suitable level from 1 to 5 (where 1 = soft and 5 = sharp)
with or , and press .
The <smoothing> menu appears.
Attention
• [Smoothing] is disabled when the
screen is displayed with a resolution
of 1280 × 1024.
• Blurring is not eliminated completely
because the screen is enlarged display.
