Motorola Netopia® Router CLI Commands 2-1
Chapter 2
Motorola Netopia
®
Router CLI Commands
This chapter describes the syntax of the supported command set of the Motorola Netopia
®
R-series,
4000-series, and 3000 Enterprise-series Router families.
■
“Configuration Access Commands” on page 2-3
■
“MAC Address Security Commands” on page 2-12
■
“System Heartbeat Configuration Commands” on page 2-13
■
“Tiered Configuration Access Commands” on page 2-15
■
“Interface Configuration Commands” on page 2-16
■
“Additional LAN configuration command” on page 2-16
■
“Ethernet Interface configuration commands” on page 2-18
■
“Ethernet Interface Stateful Inspection Commands” on page 2-22
■
“Virtual LAN (VLAN) configuration commands” on page 2-36
■
“RADIUS Authentication Profile configuration commands” on page 2-39
■
“NetBIOS configuration commands” on page 2-41
■
“Generic WAN Interface configuration commands” on page 2-43
■ “Restricted WAN Interface configuration commands” on page 2-44
■ “ISDN WAN Interface configuration commands” on page 2-45
■ “ADSL WAN Interface configuration commands” on page 2-49
■ “SDSL WAN Interface configuration commands” on page 2-51
■ “Priority Queuing (TOS bit) Commands” on page 2-55
■ “Differentiated Services (Diffserv) commands” on page 2-56
■ “PVCs” on page 2-58
■ “DSL Line Type Interface Configuration Commands” on page 2-61
■ “T1 WAN Interface configuration commands” on page 2-62
■ “T1 Statistic and Diagnostic commands” on page 2-65
■ “Unprotected Services Configuration Commands” on page 2-68
■ “IGMP Configuration Commands” on page 2-70
■ “Global IP Configuration Commands” on page 2-73
■ “DHCP Gen-Options, Option Groups, and Option Filtersets Commands” on page 2-77
■ “Wireless Configuration Commands” on page 2-86
