Entering and Changing Data
The keyboard gives you the ability to enter numeric, alpha, or
alphanumeric data. To send data to the printer, enter the
desired data and press .
The screen always shows a prompt with underscores to show
the maximum length for the data.
Format: SAMPLE
Enter Batch Name:________
For example, this screen shows you can enter up to 8
characters before pressing . If you try to enter more
than 8 characters, the printer beeps. Your entry is not
accepted until you press .
Some fields specifically require numeric or alphabetic data. If
you try to enter numeric data for an alpha field, or alphabetic
data for a numeric field, the printer will beep. You must then
enter the correct data, and press .
If you want to change any data before pressing , either:
• Type new data over the old data, then press .
• Press to clear the data and re-enter the correct
data, then press .
• Use the cursor movement keys to move to the specific
character(s) you want to change. Press after
you make the changes.
Getting Started
1. Getting Started
1-7
