A SERVICE OF

logo

Open as PDF
next previous
The default is increase (I) from step zero (0). The steps are in
1/192 inches (one dot). A dot is the smallest area on which the
printer can print. Increase moves the cut up; decrease moves
the cut down.
1. From the main menu select Printer Options, press .
2. When you see
Select Printer Option: ↓
Use Batch Separators __
press until you see Adjust Print Position, then press
.
3. You’ll see
Print adjustment
I)ncrement or D)ecrement?
I
4. Now you can either:
Type I and press to move the data up.
You’ll see
Amount of Print increase
[0-144]: 0__(Steps)
Setting Printer Options
5. Setting Printer Options
5-5