A SERVICE OF

logo

Getting Started 1-7
18. Plug the scanner cable connector into the socket
and then turn the connector to lock the cable in
place.
19. Remove the tape from the Velcro on the
keypad/terminal and put the keypad/terminal onto
the shelf.
20. Plug the printer's power supply cable into a
GROUNDED
electrical outlet. ALWAYS PLUG
THE PRINTER INTO THE ELECTRICAL WALL
OUTLET FIRST, AND THEN TURN ON THE
PRINTER.
21. Plug the keypad/terminal's power cable into a
GROUNDED
electrical outlet.
WARNING
The printer and power supply should
never be operated in a location where
either one can get wet. Personal injury
could result.
22. Press the power switch on the back of the printer
to the ON position (I) to turn on the printer.