A SERVICE OF

logo

3-2 Care and Maintenance
Cleaning the Printhead
Clean the printhead every time you load a new label
roll into the printer.
1. MAKE SURE THE POWER IS OFF. Press (O) to
turn off and (I) to turn on.
2. Press the cover release buttons (on both sides of
the printer) towards the front of the printer. Lift
open the cover.
3. Gently rub the cleaning pen across the printhead.
4. Allow the printhead to dry for one minute before
closing the cover and resume printing.
Checking the Software Version
Your keypad/terminal displays the software version
when it is turned off and then turned back on.