A SERVICE OF

logo

Open as PDF
next previous
Getting Started 1-9
Clearing the Buffer
To clear the buffer:
1. Turn off the printer.
2. Load labels for non-peel mode. See Chapter 2,
"Using the Pizza Hut Application."
3. Press and hold the FEED button while turning on
the printer.
4. Release the FEED button when the indicator light
starts flashing red.
Several labels advance including the status
label.
5. Press the FEED button.
Switching Print Modes
To switch the printer to print labels for Hot Hold Items:
1. Open the peel bar cover by pushing down.
2. Change print modes to peel by switching the print
mode switch to the (1) position.
1=Peel Mode
O=Non-peel Mode
3. Load supplies for Hot Hold Items, See Chapter 2,
"Using the Pizza Hut Application," for more
information.
Peel Bar
Cover
Print Mode
Switch