Changing Transmitter Batteries
1.
Open the battery cover by turning it counterclockwise to OPEN using
a coin.
2.
Place the battery inside the cover with the positive (+) side facing the
cover.
3.
Make sure the sealing ring is in the groove to ensure water resistance.
4.
Place the cover with the battery inside it into the connector. Press
the cover in place and close it by turning clockwise from OPEN to
CLOSE using a coin.
In order to ensure maximum life span of the battery cover, open it only
when you need to change the battery. Change the sealing ring of the
battery cover every time you change the battery. You can purchase the
sealing ring/battery kits at well-equipped Polar retailers and authorized
Polar Services. In the USA and Canada, the additional sealing rings are
available at authorized Polar Service Centers only.
Keep the batteries away from children. If swallowed, contact a doctor
immediately.
Batteries should be disposed of properly according to local regulations.
ENGLISH
Customer Service Information 37
