ST-4
USER MANUAL
12
6 THE ENCODER – STANDARD NAVIGATION MODE
Navigate into the various functions and menus of the DM-16 DIGIMAX is quick and
easy. A multi-function continuous encoder
[M] allows the user to surf all the
meter functions, easily selecting the required function and quickly setting the desired
values, by simply rotating and pressing the encoder itself. Thanks to the ergonomic
design of the encoder knob just one hand is required.
When an item in the LCD [F] is black-highlighted, rotating the encoder [M] one step
clockwise will highlight the next item; rotating the encoder [M] one step counter-
clockwise will highlight the previous item.
Once black-highlighted the desired item, press and release the encoder knob, and the
black highlight will start blinking. When the black highlight is blinking, rotating the
encoder [M] one step clockwise will raise the value of the selected (highlighted) item;
rotating the encoder [M] one step counter-clockwise will decrease the value of the
selected (highlighted) item. Once set the appropriate value, just press and release the
encoder knob, and the black highlight will stop blinking, allowing you to move to a
different item by simply rotating the encoder knob.
These features will from now on be referred to as “Standard Navigation Mode”
7 METER CONFIGURATION
Press and hold for 2” the VOLUME [C] key.
7.1 METER SETUP
Rotate the encoder [M] to highlight the item METER SETUP.
Press the encoder [M] to enter the meter setup menu.
