ST-4
USER MANUAL
9
MAIN FUNCTION
SECONDARY FUNCTION
(press and hold for 2”)
Bloc
Num
G Graphic Display TFT
F Graphic Display LCD
M Select (rotate) and confirm (press) Direct Frequency Input
A Main switch (ON/OFF)
Level/Ch. Power meas. (press
once)
RESET (press and hold for 10”)
C VOLUME / VIDEO IN Setup menu configuration key .
E S.C.R. LNB (single cable multi users installation) DUAL LNB (dual feed dish alignment)
2 SAT FINDER 2
1 PLAN (channel plan, memory plan) 1
3 SPECT SAT POINT 3
H ZOOM (BER –MER)
4 MEAS (activates the measurements options) ESCAPE 4
5 MPEG PICT (shows the program list) Enable / Disable the TFT display 5
7 RECALL DATA LOGGER and SMATV TEST 7
8 HELP (authomatic identification of the
satellite/signal)
BUZZER (antenna pointing aid) 8
L AUTOMEMORY (automatic search and storage)
9 MANUMEMORY (manual storage) STORE 9
0 BARSCAN Enable/Disable the RF feed 0
6 SAVE DATA LOGGER and SMATV TEST
D DiSEqC MOTOR (motorized dishes managing)
B External Power supplier/adaptor LED indicator
Battery charging LED indicator
P RF feed LED indicator
The keys labeled through a number can also be used for direct frequency input.
