ST-4
USER MANUAL
16
{๎ SatSCR CABLE
Using the Standard Navigation Mode, highlight the item SatSCR CABLE. Then
press the encoder [M] knob once and the LCD [F] will display:
The meter will perform the spectrum analysis for each user (from USER N.1 to
USER N.8).
The black-filled spectrum is referred to the currently selected user; the other
usersโ signals appears as a shape.
Using the Standard Navigation Mode, you can set up the signal level end-of-
scale.
7.4 LOUDSPEAKER VOLUME AND TFT DISPLAY SETUP
Press once and release the VOLUME [C] key.
If the encoder [M] receives no input for 5โ, the meter will quit to the last
performed function.
~๎ LOUDSPEAKER VOLUME SETUP
Using the Standard Navigation Mode, highlight the VOLUME item and set the
desired loudspeaker volume. Press once and release the encoder [M] knob to
enter your selection.
Press once and release the MEAS
[4] key to quit the menu.
