Operating Manual
To avoid any problems, on receipt of your pump
always use the following procedure:-
2.1 Documents
1. Check the delivery note against the goods
received.
2. If the pump has been delivered with an
electric motor check that the motor
instructions are available.
2.2 Unpacking
Care must be taken when unpacking the pump,
and the following stages must be completed:-
1. Inspect the packing for any possible signs
of damage in transit.
2. Carefully remove the packing away from
the pump.
3. Inspect the pump for any visible signs of
damage.
4. Clean away the packing from the pump
port connections.
5. Ensure that any additional equipment such
as seal flushing pipework is not damaged.
2.0 Unpacking, Handling and Storage
Pump Pedestal Mounted
2.3 Handling
DLING
Refer to the pump weights guide, prior to using
any lifting gear. Use the correct lifting slings for
the pump weight (or pump and drive if
applicable).
The following details show how the pumps
should be lifted.
Bareshaft Pump :- the slings should be
wrapped around the ports and the drive shaft.
Pump with in-line Drive Unit:- the slings
should be positioned around the pump rotorcase
and under the motor.
Note :- To stop the slings slipping always cross
the slings on the lifting hooks.
Bareshaft Pump
Pump with in-line Drive Unit
4
