22 Installing User Software on a Windows Computer
Completing the Windows NT 4.0 and/or Windows 2000 printer
connection
To print from Windows NT 4.0 you need to:
• Set up network servers, if any
• Set up the GA-1040 to accept print jobs from your computer
• Configure a port on each Windows NT computer for the network type
Completing the Windows NT 4.0 and/or Windows 2000 parallel port
connection
The parallel port cable connects the GA-1040 to a single computer. Once you have
installed the Windows NT 4.0 or Windows 2000 printer driver and the GA-1040
PPD, complete the setup for parallel port printing.
TO SET UP PARALLEL PRINTING FOR WINDOWS NT 4.0 AND/OR WINDOWS 2000
1. Click the Start button, choose Settings, and then choose Printers.
2. Double-click the Toshiba e-STUDIO 45 icon and choose Properties from the Printer
menu.
In the Ports tab, confirm that LPT1 (Local Port) is checked.
The GA-1040 is ready to accept parallel print jobs from your computer, using the
Windows NT 4.0 or Windows 2000 PostScript printer driver and the GA-1040 PPD.
To do this: See:
Configure the parallel connection “To set up parallel printing for Windows NT 4.0
and/or windows 2000” below.
Configure the TCP/IP (LPR port)
connection
“Completing the Windows NT 4.0 TCP/IP and
LPR connection” on page 23 or “Completing the
Windows 2000 TCP/IP and LPR connection” on
page 26
Configure the IPX (Novell)
connection
“Completing the Windows NT 4.0 and/or
Windows 2000 IPX (Novell) connection” on
page 27.
