A SERVICE OF

logo

24 Installing User Software on a Windows Computer
TO SET UP TCP/IP AND LPR PRINTING FOR WINDOWS NT 4.0
1. Open the Properties dialog box for the GA-1040, and click the Ports tab.
2. Click Add Port.
The available port types are displayed.
3. Select LPR Port and click New Port.
If the LPR port is not listed, install the TCP/IP network protocol and Microsoft
TCP/IP printing software. See the Configuration Guide or your Windows NT
documentation.
4. Enter the IP address of the GA-1040.
If your network uses Domain Name Services (DNS), enter the DNS name assigned to
the GA-1040 instead of the IP address.