I _ GETTING STARTED
Before Watching TV
Programs
• Your dealer should adjust the color convergence when your TV is delivered. However,
convergence may drift over time or if you move the TV. If you can see clear images on
the screen, skip this page.
This wide projection TV uses three
separate TV tubes; a red one, a green
one, and a blue one.
The red, green and blue images are
projected onto the screen where they
converge to form a full color picture.
You can see a clear picture when they
converge correctly.
I................' I....
FHORIZ-I I-VERT,,I TEST
199 9 911::_
TEST button
Color conver ence controls
HORIZ(ontal)
R: Red
B: Blue
VERT(ical)
R: Red
B: Blue
To check and align the colors
Select an active channel and wait a moment for the picture to
stabilize.
Push the TEST button to set to the "TEST ON" position.
If alignment is correct, there will be one vertical and one horizontal
white line: so you don't have to align the colors.
White
If you see separate colored lines, adjust the color convergence
controls. Turn the knobs until the red and blue lines disappear into
the other lines.
Light blue Yellow
When color convergence is correctly adjusted, you will see single
white lines.
White
Push the TEST button again to set to the "TEST OFF" position.
28
