A SERVICE OF

logo

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-712BR
43
Technical Specifications
Hardware
Standards
IEEE 802.3 (10BASE-T), IEEE 802.3u (100BASE-TX), IEEE
802.11b, IEEE 802.11g, Based on IEEE 802.11n technology,
IEEE 802.3az
WAN 1 x 10/100Mbps Auto-MDIX WAN port (Internet)
LAN 4 x 10/100Mbps Auto-MDIX LAN ports
WPS Button
Enables Wi-Fi Protected Setup (WPS) function (Hold for 3
seconds)
Power Switch On/Off power switch
Connection Type Dynamic IP, Static (fixed) IP, PPPoE, PPTP, L2TP
Supported Web Browsers
Internet Explorer 6.0 or above, Firefox 2.0 or above,
Chrome, Opera, Safari
Internet Access Control
MAC Address Filter, Domain/URL Filter, Protocol/IP Filter,
Virtual Server, DMZ host, UPnP, PPTP/L2TP/IPsec VPN
pass through
Management / Monitoring
Local/remote configuration, upgrade firmware,
Backup/Restore configuration via Web browser, Internal
System Log, Syslog, E-Mail Logging, Ping Test Tool,
Dynamic DNS
Routing
Static
LED Indicators
Power, LAN1 - LAN4, WAN, WLAN
Power
Input: 100~240V AC, 50~60Hz
Output: 5V DC, 1A
Power Consumption
3 Watts (max)
Dimensions (L x W x H)
158 x 109 x 34 mm (6.2 x 4.3 x 1.3 in)
Weight
204 g (7.2 oz)
Temperature
Operating: 0° ~ 40°C (32° ~ 104°F)
Storage: -10°C ~ 70°C (-14° ~ 158°F)
Humidity Max. 95% (non-condensing)
Certifications
CE, FCC
Wireless
Frequency 2.412 ~ 2.484 GHz ISM band
Antenna 1 x 2dBi fixed dipole antenna
Modulation
DBPSK/DQPSK/CCK/OFDM (BPSK/QPSK/16-QAM/64-
QAM)
Media Access Protocol CSMA/CA with ACK
Data Rate
802.11b: up to 11Mbps
802.11g: up to 54Mbps
802.11n: up to 150Mbps
Output Power
802.11b: 15dBm (typical) @ 11Mbps
802.11g: 17dBm (typical) @ 54Mbps
802.11n: 18dBm (typical) @ 150Mbps
Receiving Sensitivity
802.11b: -85dBm (typical) @ 11Mbps
802.11g: -68dBm (typical) @ 54Mbps
802.11n: -62dBm (typical) @ 150Mbps
Encryption
64/128-bit WEP (HEX/ASCII), WPA /WPA2-PSK,
WPA/WPA2-RADIUS
Channels 1-11 (FCC), 1-13 (ETSI)
*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual
data throughput and coverage will vary depending on interference, network traffic, building
materials and other conditions.