Filter
Top Products
English 202391A
11
Check the 3M
TM
Bair Paws
TM
system website to ensure you have the most recent version of this document. www.bairpaws.com reorder #202391A
Mounting the Warming Unit with
a Suction Wall Mount Adapter
1. Slide the Bair Paws suction wall mount adapter
into the suction wall bracket. If the adapter is
too large to t, remove the expand spacer.
2. Increase the expander on the Bair Paws suction
wall mount adapter by gently turning the screw
counter clockwise until the adapter is securely
fastened (torque < 10 in-lbs). e adapter
should not be able to move in any direction
within the suction wall bracket once fastened.
CAUTION: Overtorquing may cause device damage.
CAUTION: To prevent pinching, only hold the front of
the adapter when increasing
decreasing the expander.
3. Slide the Bair Paws 875 warming unit into the
suction wall mount adapter.