Filter
Top Products
FileServ Version 4.3—600726 Rev A Page 13 of 22
www.adic.com
Step 8. Run the following commands shown below:
Step 9. Remove fileserv*.h; move fileserv*.dbd, and change directory:
Step 10. Modify the "fs1.ddl" file as follows:
a) Find the "record fileattr_rec {" line
b) Modify the following line from:
char fadmhdl[64]; /* DMIG handle binary data */
to:
char fadmhdl[64][1]; /* DMIG handle binary data */
c) Find the "record dirdb_rec {" line
d) Modify the following line from:
char drdmhdl[64]; /* DMIG handle binary data */
to:
char drdmhdl[64][1]; /* DMIG handle binary data */
Step 11. Get the numbers for both the fileserv5 and fileserv1 databases to be regenerated by using
ls
fs1_*.dbd.old.
For example, if fs1_4.dbd.old and fs5_4.dbd.old are returned the
number is 4. There should be one pair of these files for each file system associated with
FileServ. If the fs5_#.dbd.old file does not exist, make a note and do NOT run the
ddlp for the
fs5.ddl in Step 11 for this number (the fs1_4.dbd should still be run).
Step 12. For each of the numbers obtained above, modify the
fs1.ddl and fs5.ddl files by changing
the number to the current new number. For example, the
fs1.ddl file will have a line similar
to what is shown below:
It should be changed to:
ddlp fs2.ddl
ddlp fs3.ddl
ddlp fs4.ddl
rm fileserv*.h
mv fileserv*.dbd ..
cd ..
database fs1_5 {
database fs1_4 {